How to Fix Doesn’t Have a Valid IP Configuration Error on Windows 11

How to Fix Doesn’t have a valid IP configuration error on Windows 11 and want to fix it?

Ever been in the middle of intense work, a few minutes away from your deadline, only to receive the Doesn’t have a valid IP configuration error on Windows 11? This situation can be frustrating, especially if you don’t have an alternative device or another network to connect with.

Every device connected to a network has an assigned IP address which serves as its identity in the internet world. If the IP address fails to be configured, it could be due to faulty drivers, improperly configured routers, malware attacks, disabled services, damaged hardware, and so on.

Whatever the reason, you must be looking for a fix to get your PC back to work so you can save yourself from serious trouble. Well, don’t you worry, as we’re here to save the day. Below, we’ve covered several solutions through which you can eliminate the Doesn’t have a valid IP configuration error on Windows 11 successfully.

So what are you waiting for? Let’s get started!

1. Check the Connections.

Before jumping straight to the fixes for your system, ensure that the issue actually lies there. The Doesn’t have a valid IP configuration error on Windows 11 also occurs if you have problems with the internet connection.

To check this, use another device to connect to the same Wi-Fi network. If the same error occurs in more than one device, your Internet Service Provider is likely responsible. We recommend getting in touch with their professional team to solve the matter.

If you’re using Ethernet, make sure the connections are in the correct order, and the dedicated cable is properly plugged at both ends. As dirt and debris can get accumulated in ports, we also advise that you take the cable out, remove any dirt in both ports, then plug it back in and see if that works. 

Doesn't Have a Valid IP Configuration Error on Windows 11

2. Restart the Router.

If the fault is not in the ISP but on your end, another basic check is to restart the router or modem. By doing so, you’re purging the stored settings and cache in the device that may have gotten full over time, resulting in the Doesn’t Have a Valid IP Configuration Error on Windows 11.

To do so, follow these simple steps:

  1. To get started, turn off the router/modem.
restart router
  1. Then, unplug it from the power source. 
  2. If your router has batteries, be sure to remove those as well.
  3. Wait for a few minutes.
  4. After that, replug in the device and turn it back on.

If this doesn’t solve anything for you, follow the other methods mentioned below.

3. Renew the IP Address.

This is among the most common remedies for any IP address-related errors. Basically, when you release your current IP address, you’re requesting the DHCP server, like your router, to assign your computer a new IP address. Since the old one will be given up, any error associated with it will also disappear. 

Here’s what you need to do:

  1. Start by searching for Windows Powershell in the Search bar.
  2. Then, click on Run as administrator.
Windows PowerShell Windows 11
  1. Once it opens, run the following commands in the prompt one by one:
ipconfig /release
ipconfig /flushdns
ipconfig /renew
Doesn't Have a Valid IP Configuration Error on Windows 11

That was it! Now check if your computer connects to the network.

4. Set IP Address Settings to Automatic.

If you received the Doesn’t Have a Valid IP Configuration Error on Windows 11 right after configuring your computer’s wireless network adapter with a custom IP address, then this fix is for you. As you can already tell, the issue will be rectified by setting the related settings to automatic.

Follow the steps below to do so:

  1. First, press the Windows key + R and type control panel. Then, click on OK.
  2. Now, select the View by: Large icons and go to Network and Sharing Center.
Control Panel Windows 11
  1. From the left pane, click on Change adapter settings.
Network and Sharing Center Windows 11
  1. Then, right-click on Wi-Fi to open its context menu. From the options, choose Properties.
Change adapter Settings
  1. If the User Account Control box appears, click on Yes.
  2. In the Networking tab, double-click on Internet Protocol Version 4 (TCP/IPv4) to launch its properties box.
Doesn't Have a Valid IP Configuration Error on Windows 11
  1. Check the option Obtain an IP address automatically and click on OK.
Doesn't Have a Valid IP Configuration Error on Windows 11
  1. Now double-click on Internet Protocol Version 6 (TCP/IPv6), check the Obtain an IPv6 address automatically option, and click OK.

5. Disable Fast Startup.

The Fast Startup feature on Windows 11 allows your PC to recover immediately after being put to sleep, hibernation, or completely shut down. Though this may sound like enhanced performance, it’s anything but.

In fact, your computer is exposed to high risk when this feature is enabled, affecting the overall performance and resulting in all kinds of errors. Disabling Fast Startup might just be the fix you’re looking for.

Here’s how to do it:

  1. Search for Control Panel in the Search bar and launch the program.
  2. Choose View by: Large icons and click on Power Options.
Power Options Control Panel
  1. From the left side, click on Choose what the power buttons do.
Doesn't Have a Valid IP Configuration Error on Windows 11
  1. Then, click on the Change settings that are currently unavailable link.
Power Options Windows 11
  1. Unselect the Turn on fast startup (recommended) option.
  2. Lastly, click on Save changes.
Turn on fast startup Windows 11

6. Restart WLAN AutoConfig Service.

Windows systems utilize the WLAN AutoConfig service to help establish a connection between your PC and the Wi-Fi network. If, for some reason, this service encounters an issue, you will get the Doesn’t have a valid IP configuration error on Windows 11. To combat this problem, you need to restart the service and see if that works.

Here’s how:

  1. In the Search bar, search for Services and launch the program.
  2. Scroll down and look for WLAN AutoConfig Service
  3. Right-click and choose Restart.
Restart WLAN Autoconfig Service

7. Reset TCP/IP Stack.

TCP/IP is Transmission Control Protocol and Internet Protocol via which Windows systems communicate with other systems and the internet. The purpose is to transmit and receive digital data from one device to another. Most of the time, resetting the TCP/IP Stack seems to resolve the IP address configuration error.

If you want to try this method, follow the steps below:

  1. To begin, right-click on the Start menu and choose Terminal (Admin).
Windows Terminal
  1. Now, run the following commands in the prompt one by one:
netsh winsock reset
netsh int ip reset
Doesn't Have a Valid IP Configuration Error on Windows 11

8. Re-Enable Network Adapter.

The Doesn’t have a valid IP configuration error on Windows 11 also occurs due to faulty network adapters. It is a hardware component that assists in connecting the computer to a computer network. To deal with this situation, consider disabling and re-enabling the network adapter.

Below are the steps you must do:

  1. Firstly, press the Windows key + R to open the Run utility box.
  2. Type ncpa.cpl and click OK.
  3. Now right-click on Wi-Fi and select Disable.
Disable Network Adapter
  1. In the User Account Control box, click on Yes.
  2. Wait for about 10 seconds, then right-click again and choose Enable.

9. Fix Network Drivers Issues.

As you may know, drivers are the key element in the functioning of your computer. Each service has its dedicated drivers like network, audio, graphics, etc. If any of them gets corrupted, damaged, or outdated, its related function will be disrupted. 

Here’s how to resolve them:

  1. Start by right-clicking on the Start menu and choosing Device Manager.
Device Manager Windows 11
  1. Expand the Network Adapters options. 
  2. Right-click on your network adapter and choose Update driver, Disable device, or Uninstall device according to the requirement.
Doesn't Have a Valid IP Configuration Error on Windows 11
  1. Follow the on-screen instructions to continue.
  2. Restart the computer when done to apply the changes.

10. Reset Network Settings.

You’re left with resetting the network settings as your last option if none of the above methods helped. By doing this, you’ll lose all the configured network settings, such as the IP address and DNS server settings, but you can reconfigure them after resetting.

Here’s what you need to do:

  1. Press the Windows key + i to open Settings.
  2. From the left pane, go to Network & internet.
  3. Then, click on Advanced network settings from the right pane.
Advanced network settings Windows 11
  1. Scroll down and go to Network Reset.
  2. Finally, click on the Reset Now button.
Reset Network Settings Windows 11

With the solutions mentioned above, you’ll be able to fix the Doesn’t have a valid IP configuration error on Windows 11 in no time. Do let us know your feedback and ask questions if you have any. With this, we end our guide here.

If this guide helped you, please share it. 😊

Author

  • Aimen Choudhry

    Aimen Choudhry is an architecture student who has always been fascinated by science. She now finds her therapy researching and writing about the latest technology and the issues that come alongside. Otherwise, you’ll find her playing video games, listening to music, or watching fantasy/sci-fi movies.

    View all posts
Leave a Reply

Your email address will not be published. Required fields are marked *