How to Fix ‘Service Control Manager Error 7001’ on Windows?

Wondering how to fix ‘Service Control Manager Error 7001’ on Windows?

How to Fix ‘Service Control Manager Error 7001’ How to Fix ‘Service Control Manager Error 7001’

Service Control Manager in Windows is responsible for starting and stopping the Windows processes such as startup programs and drivers. The primary function of this program is to start all the required services when the system starts. 

Recently, several users reported that their screens are displaying the Service Control Manager Error 7001’ error code after their system crashed unexpectedly. We looked into this matter and found out that this error can be caused by various reasons, including corrupt system files and software changes.

If you are facing a similar situation, you are in the right place. We have listed a few simple yet effective solutions that will help you resolve the issue in no time. 

Let’s get started. 

1. Enable the Required Services. 

For some Windows components and services to work, all the relevant services must be enabled and performing as expected. If any one of the services fails to perform, it can result in a system crash and errors like the ‘Service Control Manager Error 7001’. 

If your screen is displaying the error under consideration, the first thing you should do is check if all the services, including RPC Endpoint Mapper, Security Accounts Manager, Server, DCOM Server Process Launcher, and Remote Procedure Call are enabled. In case they are disabled, then you must enable them to fix the issue. 

Here is what you need to know:

  1. Open a Run dialogue box by pressing Windows + R keys simultaneously.
  2. Type ‘services.msc’ in the text field and hit Enter. Doing so will open the Services window. 
Fix: DISM Error 1726 “The remote procedure call failed”
  1. Inside the Services screen, scroll down and locate DCOM Server Process Launcher.
  2. Once found, right-click on it and select Properties.
How to Fix ‘Service Control Manager Error 7001’
  1. Go to the General tab and select Automatic from the drop-down menu against Startup. Also, make sure that the Service status is Running.
How to Fix ‘Service Control Manager Error 7001’
  1. Finally, click on Apply to save the changes. 
  2. Now repeat the same process with the services mentioned below.
RPC Endpoint Mapper
Remote Procedure Call (RPC)
Security Accounts Manager
  1. Once done, reboot your PC and repeat the action that resulted in the Service Control Manager Error 7001 on your PC. 

If any one of the services mentioned above was causing the issue, following the aforementioned steps will resolve it. If the error persists, proceed to the following method below. 

2. Use the Device Manager.

As we mentioned earlier, the error at hand can occur when some services are not working correctly. 

Several users found out that the leading cause behind the issue was the Server’s poor performance itself. They managed to resolve the problem by making changes in the Windows Device Manager. 

However, this method is only suitable for the users who use the NetBIOS over Tcpip driver on their device. 

Here is what you need to do:

  1. Open Device Manager and click on View.
  2. Select Show hidden devices checkbox. 
Device manager
  1. Now locate Non-Plug and Play Drivers and double-click on it. 
How to Fix ‘Service Control Manager Error 7001’
  1. Next, double-click on NetBIOS over Tcpip and select Use this device (enable) in the Device usage box. 

Now try performing your desired task. Hopefully, you will not face the issue again.

3. Fix the Network Discovery Dependencies.

If your system’s Network Discovery component uses dependencies, then there is a high chance that the dependencies are the main culprit. 

In this case, the easiest solution to resolve the issue is to clean the PeerNetworking folder to eliminate the corruption error. Don’t worry; the process isn’t as complicated as it sounds. 

Here is what you need to do:

  1. Type Command Prompt in the search bar and click on Run as administrator to launch Command Prompt with administrative privileges. 
  2. Inside the Command Prompt window, type the command mentioned below and hit Enter. Doing so will add and enable the services required by the Network Discovery feature.
net localgroup Administrators localservice /add
net localgroup Administrators service /add
How to Fix ‘Service Control Manager Error 7001’
  1. Once done, go to File Explorer and navigate to the location mentioned below. If you cannot locate the AppData folder, click on View from the ribbon menu and checkmark the Hidden items checkbox. 
  1. Delete all the content of the PeerNetworking folder and restart your computer. 

If the Service Control Manager Error 7001 was caused by the Network Discovery Dependencies, then following the procedure mentioned above will help you fix it in no time. 

4. Try Use CleanMyPC. 

If the troubleshooting methods mentioned in this guide are not working for you, then it’s probably because your system is infected with a corruption error preventing it from operating as intended. 

In this case, we highly recommend using an efficient PC cleaner to deep clean your system. Once all the junk files are eliminated, you can proceed with the troubleshooting steps. For this purpose, we suggest using CleanMyPC.

Install CleanMyPC on your PC

It will help you get rid of junk files and solve your other PC-related problems such as slow speed, sluggish performance, and other privacy issues. Not just this, but this tool also comes with a wide range of system maintenance tools, including a Cleaner, Multi Uninstall, and Performance Booster, to help your PC get up and running like new. 

Install CleanMyPC now if you want to enjoy all these perks!

Try CleanMyPC Now!

5. Perform a System Restore.

Another common cause behind system crashes and errors like the Service Control Management issue is corrupt updates and installations. If you started facing the problem right after installing the latest system update or a new driver on your system, then a corruption error within those newly installed files might be causing the issue.  

Well, the good part is that you can always undo the changes you make on Windows and revert the system to a previous, error-free state.

Our operating system automatically creates restore snapshots before executing critical operations so that if in the future you want to go back to the previous version, you can do so easily. All that you need to do is perform a system restore, and once the process is complete, you won’t see the error again!

This brings us to the end of our guide on fixing the ‘Service Control Manager Error 7001’ on Windows. We tried walking you through all the steps in detail and hope that one of the methods helped you fix the issue once and for all. If you have any questions regarding the troubleshooting steps, please let us know in the comment section below!

If this guide helped you, please share it. 🙂


  • Zainab Falak

    Zainab Falak is a staff writer for Saint and an expert in Microsoft Windows, having authored more than 200 posts. She has a Bachelors in Actuarial Sciences and her passion for computers extends to exploring various aspects, from UI customization to the Windows registry and exploring error codes. Twitter LinkedIn

    View all posts
Leave a Reply

Your email address will not be published. Required fields are marked *