How to Fix System Restore Point Error Code 0x80042308 on Windows 10

windows

Are you facing the System Restore Point error code 0x80042308 on Windows 10?

System Restore Point Error Code 0x80042308 on Windows 10

System Restore is a useful Windows feature that lets users restore their operating system to an earlier date or a previous point in time. It works by taking snapshots of the important system files before performing a critical operation. These snapshots are then saved as restore points, and the users always have the option to revert their system’s state.

This feature is widely used to resolve errors that cannot be fixed using conventional troubleshooting methods. 

Recently, several users reported that their screens are displaying the System Restore Point error code 0x80042308 when they attempt to create a new restore point. 

We had a look into this issue and have compiled a list of some of the most effective troubleshooting steps that can help you fix this problem in no time.

Let’s get started.

1. Clear Previous Restore Points.

One of the most common reasons behind the occurrence of the error code 0x80042308 on Windows 10 is the corrupt system points. 

These corrupt restore points will not allow you to create any new points or revert your computer’s state, and an easy way to resolve the issue is to clear previous restore points. 

Here is how you can do that:

  1. Type Create a restore point in your search bar and click on Open.
  2. Go to the System Protection tab and select the Local Disk (C:) (System)
  3. Now click on the Configure button to modify the settings. 
System Restore Point Error Code 0x80042308 on Windows 10
  1. Click on the circle against Disable system protection to enable the option and select Apply to save the changes you just made. 
System Restore Point Error Code 0x80042308 on Windows 10
  1. If a window pops up to confirm the action, click on Yes. Doing so will clear all the previous restore points on Windows, including the corrupt ones. 
  2. Now that you have cleared the previous points, you must turn this feature back on to be able to create new points in the future. 
  3. To do so, follow the first 3 steps again but this time, click on the circle against Turn on system protection
  4. Select Apply to save the changes and then restart your PC. 

If corrupt system restore points were causing the issue, clearing them will resolve it. You should now be able to create new points and use them without any issues. 

2. Restart Volume Shadow Copy. 

A Volume Shadow Copy Service creates backup copies of your operating system’s files and volumes.

Several users found a corrupt Volume Shadow Copy to be the culprit behind the System Restore Point error code 0x80042308 on Windows 10 and managed to resolve the issue by restarting the Volume Shadow Copy. 

If clearing the previous restore points did not help you resolve the issue, then try restarting the Volume Shadow Copy. 

Here is how you can do that:

  1. Type Services in the search bar and click on Open.
  2. Inside the Services window, locate Volume Shadow Copy and right-click on it. 
System Restore Point Error Code 0x80042308 on Windows 10
  1. Select Stop to disable the service temporarily. 
  2. Now right-click on the Volume Shadow Copy again and this time, click on Start.
  3. Once done, select Properties by right-clicking the same service. 
  4. Inside the General tab, click on the dropdown menu against Startup type and choose Manual.
System Restore Point Error Code 0x80042308 on Windows 10
  1. Also, make sure that the Service status is Running
  2. Finally, click on OK to save the changes you just made and check if doing so resolved the issue at hand. 

Hopefully, doing so will resolve the 0x80042308 error on Windows 10. 

3. Run CHKDSK Scan. 

There are times when the System Restore Points fail to work because of the issues within your hard drive. 

Such issues are common to occur but luckily, Windows comes with several built-in utilities that can help you resolve these problems in no time. 

To resolve issues within the hard drive, we would be running a Check Disk (CHKDSK) scan. This scan will identify the issues within your hard drive, and attempt to fix them with little to no user input. 

Here is what you need to do:

  1. Type cmd in the search bar and click on Run as administrator to launch elevated Command Prompt. 
  2. Inside Command Prompt, type the command mentioned below and hit Enter
chkdsk / r
  1. Wait for the scan to complete and then restart your PC. 

If a corruption error within your hard drive was causing the issue, following the steps mentioned above will resolve it. In case you want to scan your whole system for issues and fix them, jump to Method 5. 

4. Increase Disk Space Usage Value. 

Windows uses the hard disk to store information when the memory of the operating system reaches its limit. 

System Restore Points are also stored on hard disks, and typically occupy around three to five percent space on each disk. If all the space on your hard disks is occupied, System Restore will delete the old points to make space for the new ones. 

If your screen is displaying the error at hand even after following the troubleshooting methods we mentioned above, then there is a possibility that the disk space usage on your operating system is set to 0 instead of 3 or 5%. 

The simplest way to resolve this issue is to increase the disk space usage value. 

This is a straightforward process, and will not take much of your time. 

Here is what you need to do:

  1. Type Create a restore point in the search bar and click on Open.
  2. Go to the System Protection tab and select Local Disk (C:) (System).
  3. Click Configure to proceed. 
  4. In the next window, check the slider against Max Usage and drag it to 3%
System Restore Point Error Code 0x80042308 on Windows 10
  1. Once done, click on Apply to save the changes and then hit OK
  2. Finally, restart your PC. 

In case low disk space usage was causing the System Restore Point error code 0x80042308 on Windows 10, increasing the disk space will resolve the issue. 

5. Try Using CleanMyPC. 

Errors like the one under discussion are common to occur due to corruption errors within your system. 

If you haven’t deep cleaned your PC and eliminated the junk files in a long time, then now might be the right time to do so, as not taking an action now can cause further issues in your PC. 

The best way to get rid of the junk files and viruses within your system is by using an efficient PC cleaner and if you are looking for a suggestion, we would highly recommend using CleanMyPC

Install CleanMyPC on your PC

CleanMyPC comes with a wide range of system maintenance tools including (but not limited to) a Multi Uninstaller, Registry Cleaner, and a Speed Booster. These tools can take care of all your system-related issues, whether it is slow speed, sluggish performance, or online privacy threats. 

The best thing about this CleanMyPC is that it is relatively simpler to use than the other cleaners available online, so even if this is your first time using a PC cleaner, you will do just fine!


Try CleanMyPC Now!


6. Clean Boot your PC. 

If none of the methods mentioned above works for you, then there is a chance a background application or program in your operating system is causing the issue. 

In this scenario, we encourage you to go ahead and restart your PC in a Clean Boot state

A Clean Boot state will start your operating system with a minimum set of drivers, allowing you to identify the faulty background program. Once the culprit is identified, you can uninstall that program and hopefully, the System Restore Point error code 0x80042308 on Windows 10 will be resolved once and for all. 

This brings us to the end of our guide on fixing the System Restore Point error code 0x80042308 on Windows 10. We hope that one of the steps mentioned in this guide did the trick for you. In case you still have questions about the troubleshooting steps, feel free to let us know in the comment section below.

If this guide helped you, please share it. 🙂

Leave a Reply

Your email address will not be published. Required fields are marked *

Previous Post
Error 1603 or 0x00000643 Microsoft Edge Installation or Update

How to Enable or Disable Autofill in Microsoft Edge

Next Post
windows

How to Set a Default Background Wallpaper for all Users in Windows 10

Related Posts