How to Fix Stuck on Repairing Disk Errors on Windows 11

Are you stuck on repairing disk errors on Windows 11 and don’t know what to do?

Irrespective of your computer brand and model, your system may end up Repairing disk errors occasionally. It may lead to data loss, system crash, or in some extreme cases, hard drive failure. But what exactly causes this error?

Well, the most common reasons behind users getting stuck on Repairing Disk errors on Windows 11 include improper shutdown, file system corruption, problem in the hardware, scratched disks, and bad sectors in the hard drive. You can follow the fixes below to troubleshoot the problem on your own.

So let’s get started right away!

1. Wait Until Windows Complete Repairing.

The first thing that you should do to fix the Stuck on repairing disk errors on Windows 11 is to wait it out until the scanning and repairing are complete. Your computer screen will also display the scanning percentage to show you how much of the repair has been done. 

However, if you interrupt the repairing process, it may damage your hard drive and your computer may crash, which will lead to other problems as well. Therefore, patiently wait as your system completes the scan. If you’ve waited long enough but the system is still unresponsive, head to the next method to fix the issue. 

2. Remove All External Devices.

The next basic troubleshooting method is to disconnect all the external devices connected to your PC. These devices tend to hinder the repairing process by utilizing the resources needed by the system. Hence, remove the devices attached to your computer and reboot your PC to effectively fix the Stuck on repairing disk errors on Windows 11. 

3. Perform CHKDSK Scan in Safe Mode.

To fix any errors or bad sectors in the hard drive, consider performing a CHKDSK scan. For this method, you will have to reboot your PC into Safe Mode. Then, execute the CHKDSK command to resolve the Stuck on repairing disk errors on Windows 11. 

Here are the steps you must follow:

1. Go to the Start menu and click on the Power icon. 
2. Next, select Restart. 
3. From the Choose an option screen, click on Troubleshoot. 
4. Then, choose Advanced options and click on Startup Settings. 

5. Click on the Restart button. 
6. After that, press the 4 key from your keyboard to boot into Safe Mode. 
7. Once your PC restarts, head over to the Start menu.
8. Type in Command Prompt in the search bar and click on Run as administrator from the search results. 
9. Now, copy and paste the following command and press the Enter key:

Chkdsk /f c:

Once the scan is complete, the Stuck on repairing disk errors on Windows 11 should be fixed. 

4. Use the Repair-Volume Command.

Another method to resolve the problem you’re facing is to utilize the repair-volume command through Windows PowerShell. Make sure to know the original drive letter of your external drive before following this method. 

Follow the steps below:

1. Click on the Start menu and type out ‘PowerShell’ in the search bar. 
2. Then, click on Run as administrator to launch Windows PowerShell with administrative rights. 

3. Enter the following commands and press the Enter key after each command. Remember to replace ‘drive-letter’ with the external drive’s letter. 

repair-volume drive-letter -scan

repair-volume drive-letter -offlinescanandfix

4. After the scan, reboot your PC and check if the Stuck on repairing disk errors on Windows 11 resolves. Otherwise, move to the following method from this guide.  
   
   

5. Perform System Restore.

By performing a System Restore, all the changes you made in the system after a specific saved point will be discarded. So, if you’ve created a system restore point in the past, now is the best time to revert your system to that point to solve the Stuck on repairing disk errors on Windows 11.

Below are the steps to follow to perform a system restore on your PC:

1. Click on the Start menu. 
2. Next, enter ‘Control Panel’ in the search bar and click on Open from the right pane. 
3. Select Recovery and click on Open System Restore from the next screen. 
4. Once the System Restore window appears, choose Next.

5. Now, select the saved recovery point that you want your system to revert to, and click on Next. 
6. Lastly, choose Finish. 

If this fix doesn’t solve your problem, follow the next method from this guide. 

6. Run Automatic Startup Repair.

If you didn’t have a saved point to perform a System Restore, don’t fret. You can still resolve the repair disk errors on Windows by running the Automatic Startup Repair. 

Simply follow the steps below to do it:

1. Press the Win key and click on the Power button. 
2. Then, select Restart. 
3. Once the Choose an option screen appears, click on Troubleshoot. 
4. Select Advanced options and choose Startup Repair. 

This will resolve the Stuck on repairing disk errors on Windows 11. If not, go to the following method to do so. 

7. Use Windows Installation Media.

If all the methods mentioned above fail to solve the repairing disk errors on Windows 11, one of the last options is to Repair Windows using the installation media. By performing this method, your system will detect and fix any errors found in the repairing disk. Moreover, this method won’t affect any data on your computer.

8. Check Your Hard Disk.

Even if the Windows Installation Media didn’t solve the repairing disk errors on Windows 11, you need to check the health of your hard disk to see if that needs any repair or replacement.

To do so, simply connect the hard disk to another PC. If the disk can’t be repaired, you will have to buy another one. 

This sums up our guide on how to fix Stuck on repairing disk errors on Windows 11. We hope that you’ve successfully repaired the disk errors on your system by following the methods mentioned in this guide. If you have any confusion or questions about this topic, feel free to use the comments section below. We’ll be happy to provide further assistance. 

If this guide helped you, please share it. 😊